Deck & Fence Cleaning in Dunwoody, GA

For homeowners in Dunwoody, GA, our professional deck and fence cleaning services restore outdoor spaces with precision pressure washing. Situated in DeKalb County just southwest of Johns Creek, Dunwoody properties receive the same prompt, reliable scheduling as our other Atlanta-area clients. Using specialized equipment, we remove dirt, mold, and grime to refresh your decks and fences, enhancing curb appeal and extending the life of your outdoor structures.

Why deck & fence cleaning matters in Dunwoody

In Dunwoody, dense suburban neighborhoods mean decks and fences are often closely packed, making them highly visible to neighbors and passersby. Regular cleaning removes dirt, mold, and mildew that thrive in the area’s humid climate, ensuring your property looks well-maintained and boosts curb appeal in a community where first impressions matter. Clean, bright surfaces also help protect your investment by preventing long-term damage from moisture and grime common in metro Atlanta’s lush, wooded settings.

This service is also available via Deck & Fence Cleaning and Dunwoody, GA.

What deck & fence cleaning actually involves, step by step

Wood species and condition check. The type of wood and its current condition — soft and weathered versus recently sealed — are checked first, since old, soft, or rotting wood fibers pressure-wash very differently than a newer deck board and can be gouged by a setting the newer wood handles fine.

Low-pressure detergent wash. A wood-safe cleaning solution is applied at low pressure to lift mildew, algae, and gray weathering from the surface, working with the grain rather than across it, since spraying against the grain is what drives water and pressure into the wood fibers instead of across the surface.

Hand or brush detail. Railings, stair treads, and tight corners the wand can't safely reach at an angle are finished by hand or with a stiff brush, since forcing a wide fan tip into a narrow gap between boards is a common way to gouge a groove into the wood.

Controlled rinse. The rinse pass stays low pressure and follows the grain the same way the wash pass did, removing loosened detergent and debris without driving water down into the joints between boards where it is slow to dry out afterward.

Dry-out period before sealing. The wood is left to dry fully — typically a couple of days depending on weather — before any stain or sealant is applied, since sealing over wood that is still holding moisture traps that moisture under the new coating instead of letting it evaporate out.

What goes wrong when deck & fence cleaning is done badly

Gouging and fuzzing the wood grain. Pressure set too high for the wood, or a tip held too close, tears open the softer grain of the board and leaves a fuzzy, splintery texture behind instead of a clean one — a texture problem that shows up worse once the wood dries and can't be pressure-washed back out.

Driving water into the joints. Spraying directly into the gap between deck boards or fence pickets forces water down into the joint and the framing underneath, where it dries far more slowly than the exposed surface and can start rot in a spot that is never visible from above.

Sealing over wet wood. Applying stain or sealant before the wood has fully dried traps residual moisture underneath the new coating, which is a common cause of a sealant job that bubbles, peels, or discolors within the first season instead of lasting as expected.

What deck & fence cleaning costs around Dunwoody

58 per square foot. That is the going estimate for a patio or deck surface with a moderate soil level. Rather than a quote or an offer, this is a snapshot of what this type of job tends to cost in the broader market — the real number for any specific job depends on its scope and the provider hired.

The most reliable way to pin down a specific job is to compare a couple of local quotes, since the range above is a starting point, not a substitute for an actual quote on the job. Source: Angi / Homewyse, 2026.

How to choose who does the work in Dunwoody

Does the quote specify the PSI and method — pressure wash vs. soft wash — for each surface? The wrong PSI on siding, roofing, or wood can cause damage, so the method should be disclosed per surface, not left as one generic number. Is a written scope listing every surface included — driveway, siding, deck, roof, fencing — provided? Bundled pricing sometimes covers only one or two surfaces despite sounding comprehensive. Are the cleaning chemicals used, and their effect on nearby landscaping and pets, disclosed before the job? Soft-wash detergents vary in strength, and runoff can affect plants or pets nearby. Does the estimate distinguish concrete or driveway work from roof or siding work? Roof and siding washing typically require lower pressure and different technique than concrete, and pricing that lumps them together can hide risk. What is the policy if pressure washing reveals pre-existing damage, like cracked paint or loose mortar? Pre-existing conditions can surface once dirt is removed, so it helps to know how that gets handled before agreeing to the job. Is post-treatment sealing for driveways or decks included in the price or billed separately? Sealing is often an add-on, not part of a basic wash.

No mention of PSI or method — pressure vs. soft wash — for each surface. The wrong pressure on siding, roofing, or wood can cause real damage, and a quote that has not specified method per surface has not actually assessed the job. A price far below every comparable bid for the same square footage. An unusually low price can mean lower-grade equipment, no pre-treatment chemical, or rushed coverage that leaves streaking. No mention of what chemicals are used or their effect on landscaping. Undisclosed chemical strength is how plants and grass near the work area end up damaged. Full payment demanded before the job starts. Paying in full upfront removes leverage if streaking, missed spots, or damage shows up afterward. Pressure to add extra services on the spot without a separate written price. Add-ons proposed in the moment are harder to compare against other bids.

Why Cleaning Comes Before Staining or Sealing

Cleaning restores the surface before staining or sealing — this step matters because a new coat of stain or sealant applied over dirt, mildew, or old failing sealant won't bond properly and will peel or fail early. A proper wash strips that layer away so the new finish adheres to bare, clean wood or composite.

Call for a quote on deck & fence cleaning for a Dunwoody property — pricing works the same as everywhere else in the service area.

See Deck & Fence Cleaning in North Decatur, GA for more — or explore the full pressure washing lineup we run in Johns Creek on a single page for our complete service area.